Q: I’d like to run 1” rods with 7/8” slimhole couplings. Can I simulate this in PC-PUMP?

A: Yes. The procedure for doing this has changed in v2.65. In v2.65, you must select a brand of rod, for which crossover sizes are available. (“Mod. API” is listed as a brand for generic rods with off size pins.) In the size and grade listing for the selected brand, off-size pins are listed, for example: “1 in. (0.875 in. Pin) Gr. D”. Other cross-over sizes are also available.

( categories: )